Dukascopy
 
  
Wiki JStore Search Login

Post new topic Reply to topic    Pages: [ 1 ] Print view  
JFOREX-2985 Major flaws with indicators
[darlu72]
 Post subject: JFOREX-2985 Major flaws with indicators Post rating: 0   New post Posted: Sun 08 May, 2011, 09:01 

User rating: 0
Joined: Thu 19 Aug, 2010, 13:53
Posts: 62
Hi,

There are major flaws with indicators. It appears they are shifted from their position.
See the wrong.jpg capture. After I restart the platform the RSI is shown correct afterthat, see the correct.jpg capture..
This is happening with all indicators, not only RSI and appears it happens after some longer work time with the platform.

Also, if I add a custom indicator via Add custom indicator box, it appears ok. But if I add it from the Recent indicators list
the platform draws the indicator lines with different colors than the preset one. It appears this happen also after a long time work with the platform. Also, in many cases, the lines are just black if I use Recent list.
And a final also, there are many situations when a custom indicator is not drawn. I have either to remove and add again or change chart from Bid/Ask several times.

You see, I am starting to get frustrated working with your JForex.
Thanks.


Attachments:
correct.JPG [242.79 KiB]
Downloaded 537 times
wrong.JPG [248.19 KiB]
Downloaded 476 times
DISCLAIMER: Dukascopy Bank SA's waiver of responsability - Documents, data or information available on this webpage may be posted by third parties without Dukascopy Bank SA being obliged to make any control on their content. Anyone accessing this webpage and downloading or otherwise making use of any document, data or information found on this webpage shall do it on his/her own risks without any recourse against Dukascopy Bank SA in relation thereto or for any consequences arising to him/her or any third party from the use and/or reliance on any document, data or information found on this webpage.
 
buyandhold
 Post subject: Re: Major flaws with indicators. Post rating: 0   New post Posted: Sun 08 May, 2011, 11:41 

User rating: 0
Joined: Wed 18 May, 2011, 23:26
Posts: 40
Location: Switzerland,
Can you clarify "longer work time"? Do you have any sample code that is able to reproduce the problem? Would gladly test it out also and give some feedback too.

I have loaded the EUR/JPY 1 hour for the same time range + RSI(12,closing prices) via the platform and the historical tester and am not able to reproduce the bug... but as you say, this disconnect between indicator values and time/price happens after some load has been placed on JForex?


Attachments:
eurjpy-rsi12.jpg [118.34 KiB]
Downloaded 583 times
DISCLAIMER: Dukascopy Bank SA's waiver of responsability - Documents, data or information available on this webpage may be posted by third parties without Dukascopy Bank SA being obliged to make any control on their content. Anyone accessing this webpage and downloading or otherwise making use of any document, data or information found on this webpage shall do it on his/her own risks without any recourse against Dukascopy Bank SA in relation thereto or for any consequences arising to him/her or any third party from the use and/or reliance on any document, data or information found on this webpage.
 
MoneyMechanics
 Post subject: Re: Major flaws with indicators. Post rating: 0   New post Posted: Sun 08 May, 2011, 12:04 
User avatar

User rating: 0
Joined: Thu 16 Jun, 2011, 21:37
Posts: 98
Location: SwitzerlandSwitzerland
try deleting your cache and settings folder and reloading the chart....?
 
[darlu72]
 Post subject: Re: Major flaws with indicators. Post rating: 0   New post Posted: Mon 09 May, 2011, 14:14 

User rating: 0
Joined: Thu 19 Aug, 2010, 13:53
Posts: 62
buyandhold wrote:
Can you clarify "longer work time"?


After I work with the platform 8 hours for example. I dont know what is the cause, but in most of the times, after 2-3 hours working with the platform it starts to move slowly, the indicators gets bulshited, the charts do not draw custom indicators sometimes, and if I look at the Tasks manager I see a javaw.exe process eating a lot of the processor time.
If I exit platform, kill the javaw.exe and restart the things go to normally at least for a period.
I do run an an Intel Core Duo, 2.2 GHz, 3Gb RAM and the pc does not have any reason to slow down the platform and make troubles.
 
Post new topic Reply to topic      Pages: [ 1 ]  
Display posts from previous:   Sort by    

Jump to:  

  © 1998-2025 Dukascopy® Bank SA
On-line Currency forex trading with Swiss Forex Broker - ECN Forex Brokerage,
Managed Forex Accounts, introducing forex brokers, Currency Forex Data Feed and News
Currency Forex Trading Platform provided on-line by Dukascopy.com