Dukascopy Support Board http://www.dukascopy.com/swiss/english/forex/jforex/forum/ |
|
closing logic with VWMA error http://www.dukascopy.com/swiss/english/forex/jforex/forum/viewtopic.php?f=21&t=55593 |
Page 1 of 1 |
Author: | mrlfx [ Wed 11 Oct, 2017, 05:56 ] | ||||
Post subject: | closing logic with VWMA error | ||||
I used VWMA for closing an open trade. But there is error as the open trade won't close when the logic conditions are met. Instance of Buy Open Order: To close an open Buy order, the close trade logic is for VWMA3<VWMA2 & VWMA2>VWMA1. What would rectify the error? Note: 1,2,3 & 0 are Shift Value.
|
Author: | vadim_berezhnoj [ Thu 19 Oct, 2017, 12:33 ] | ||
Post subject: | Re: closing logic with VWMA error | ||
Hello Here are some corrections, please check.
|
Author: | mrlfx [ Thu 19 Oct, 2017, 13:17 ] |
Post subject: | Re: closing logic with VWMA error |
Thanks for the help. But it is not closing as per logic. Looking deeper, I found that the logic of close opened positions should be preceded by the VWMA indicators blocks. So, I put all the VWMA indicators blocks just after the Candle Start at the beginning and its executing now. Thanks... |
Page 1 of 1 |