Dukascopy Support Board http://www.dukascopy.com/swiss/english/forex/jforex/forum/ |
|
SMI and Signal Variables in blocks Switched from the Chart http://www.dukascopy.com/swiss/english/forex/jforex/forum/viewtopic.php?f=141&t=55021 |
Page 1 of 1 |
Author: | Ristoril [ Sun 19 Mar, 2017, 17:39 ] |
Post subject: | SMI and Signal Variables in blocks Switched from the Chart |
see image, the values on the chart are correct, but the jforex blocks switches them so that the SMI output is really giving the signal output and vice versa |
Author: | amine_chourou [ Wed 22 Mar, 2017, 14:56 ] |
Post subject: | Re: SMI and Signal Variables in blocks Switched from the Chart |
Hi there, Sorry but I did not really understand .. how this "switch" happens exactly?? do you mean there is discrepancy between the indicaotr's value and its coordinates in the chart ? Thanks in advance for elaborating on that .. |
Author: | Ristoril [ Fri 24 Mar, 2017, 12:00 ] |
Post subject: | Re: SMI and Signal Variables in blocks Switched from the Chart |
in the block indicator "SMI" , it has two outputs : smi and signal line. The smi output instead correlates to the signal line on the chart, and the signal output , correlates to the smi line on the chart. |
Author: | amine_chourou [ Fri 24 Mar, 2017, 16:04 ] |
Post subject: | Re: SMI and Signal Variables in blocks Switched from the Chart |
Understood and thanks ! We'll fix that asap |
Page 1 of 1 |