Dukascopy Support Board
http://www.dukascopy.com/swiss/english/forex/jforex/forum/

Very Stange Issue
http://www.dukascopy.com/swiss/english/forex/jforex/forum/viewtopic.php?f=141&t=49161
Page 1 of 1

Author:  doczero [ Fri 03 May, 2013, 09:06 ]
Post subject:  Very Stange Issue

Hi Guys,

I've been getting a stange issue on this file (as per picture). The builder also seems to add a lot of candles in the auto created variables , I am really unsure why it does this??

Support can you have a look at this - I am unsure why it is causing problems,

Thanks in advance!

Attachments:
MAband3issue.jpg [187.81 KiB]
Downloaded 387 times
MABAND3.vfs [84.35 KiB]
Downloaded 320 times

Author:  doczero [ Fri 03 May, 2013, 09:20 ]
Post subject:  Re: Very Stange Issue

The other thing I find is that when I load the strategy , the calculation expression has dissapeared - photo 1 shows what it should be, photo 2 shows what happens.
Image




Image

Attachments:
Calcexpression2.jpg [225.83 KiB]
Downloaded 1107 times
Calcexpression.jpg [56.5 KiB]
Downloaded 1104 times

Author:  VisualJForex [ Fri 03 May, 2013, 11:52 ]
Post subject:  Re: Very Stange Issue

doczero wrote:
The other thing I find is that when I load the strategy , the calculation expression has dissapeared - photo 1 shows what it should be,

Seems, that it is a bug, we will investigate it and will fix it.

Author:  Visual Support [ Fri 03 May, 2013, 11:53 ]
Post subject:  Re: Very Stange Issue

doczero wrote:
The other thing I find is that when I load the strategy , the calculation expression has dissapeared - photo 1 shows what it should be, photo 2 shows what happens.

Seems that it is a bug, we will investigate it and will fix it.

Author:  doczero [ Fri 03 May, 2013, 12:57 ]
Post subject:  Re: Very Stange Issue

Thanks - what about the first error (in the MABAND3issue.jpg picture)?

Author:  Visual Support [ Mon 06 May, 2013, 10:02 ]
Post subject:  Re: Very Stange Issue

doczero wrote:
Thanks - what about the first error (in the MABAND3issue.jpg picture)?

We will investigate this problem.

Author:  doczero [ Fri 10 May, 2013, 17:06 ]
Post subject:  Re: Very Stange Issue

Hello Support,

You have fixed the calculation expression - and the other bug never has happened again. So I'd say problems solved! Thanks!

  Page 1 of 1